Question 1

In plan scale is …

Accepted Answer

A)  1cm = 10 m or 
B)  >10 m
C)  none
D)  allE) None of the above
F) A) and D)

Question 2

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known

Accepted Answer

A)  levelling
B)  centering
C)  orientation
D)  setting.E) All of the above
F) C) and D)

Question 3

The line normal to the plumb line is known as

Accepted Answer

A)  horizontal line
B)  level line
C)  datum line
D)  vertical line.E) A) and B)
F) A) and C) B

Question 4

The imaginary line passing through the intersection of cross hairs and the optical center of the objective, is known as

Accepted Answer

A)  line of sight
B)  line of collimation
C)  axis of the telescope
D)  none of these.E) A) and B)
F) None of the above

Question 5

Check lines (or proof lines)  in Chain Surveying, are essentially required

Accepted Answer

A)  to plot the chain lines
B)  to plot the offsets
C)  to indicate the accuracy of the survey work
D)  to increase the out-turnE) A) and D)
F) A) and C)

Question 6

The constant vertical distance between two adjacent contours, is called

Accepted Answer

A)  horizontal interval
B)  horizontal equivalent
C)  vertical equivalent
D)  contour intervalE) A) and C)
F) None of the above

Question 7

There are two stations A and B. Which of the following statements is correct :

Accepted Answer

A)  the fore bearing of AB is AB
B)  the back bearing of AB is BA
C)  the fore and back bearings of AB differ by 180°
D)  all the above.E) None of the above
F) All of the above

Question 8

Surveys which are carried out to depict mountains, rivers, water bodies, wooded areas and other cultural details, are known as

Accepted Answer

A)  cadastral surveys
B)  city surveys
C)  topographical surveys
D)  guide map surveysE) All of the above
F) B) and C)

Question 9

The method of finding out the difference in elevation between two points for eliminating the effect of curvature and refraction, is

Accepted Answer

A)  reciprocal levelling
B)  precise levelling
C)  differential levelling
D)  flying levellingE) A) and D)
F) A) and C) A

Question 10

The magnetic meridian at any point, is the direction indicated by a freely suspended

Accepted Answer

A)  magnetic needle
B)  and properly balanced magnetic needle
C)  properly balanced and uninfluenced by local attractive force
D)  magnetic needle over an iron pivot.E) A) and B)
F) A) and C)

Question 11

The zero of the graduated circle of a prismatic compass is located at

Accepted Answer

A)  north end
B)  east end
C)  south end
D)  west end.E) B) and D)
F) All of the above

Question 12

Scale can be represent by

Accepted Answer

A)  Engineers scale
B)  RF
C)  Graphical Scale
D)  All of aboveE) B) and C)
F) A) and D)

Question 13

The line of collimation method of reduction of levels, does not provide a check on

Accepted Answer

A)  intermediate sights
B)  fore sights
C)  back sights
D)  reduced levels.E) None of the above
F) B) and C)

Question 14

The horizontal angle between true meridian and magnetic meridian, is known

Accepted Answer

A)  bearing
B)  magnetic declination
C)  dip
D)  convergence.E) A) and B)
F) A) and C) B

Question 15

Contours of different elevations may cross each other only in the case of

Accepted Answer

A)  an overhanging cliff
B)  a vertical cliff
C)  a saddle
D)  an inclined plane.E) None of the above
F) A) and B)

Question 16

A well-conditioned triangle has no angle less than

Accepted Answer

A)  20°
B)  30°
C)  45°
D)  60°.E) All of the above
F) A) and B)

Question 17

If area is less than 250°km 2which method is used?

Accepted Answer

A)  Geodetic survey
B)  Plane Survey
C)  none
D)  allE) All of the above
F) None of the above

Question 18

Reduced bearing of a line is an angle between

Accepted Answer

A)  north line and given line measured clockwise
B)  north line and given line measured anticlockwise
C)  east or west and the given line
D)  given line and the part of the meridian whether N end or S end, lying adjacent to it.E) A) and B)
F) B) and C)

Question 19

The boundary of water of a still lake, represents

Accepted Answer

A)  level surface
B)  horizontal surface
C)  contour line
D)  a concave surface.E) A) and B)
F) A) and C)

Question 20

True bearing of a line = magnetic bearing + magnetic declination If declination is towards………

Accepted Answer

A)  East
B)  West
C)  none
D)  allE) A) and B)
F) B) and D)

Exam 3: Surveying and Levelling: Part B

In plan scale is …

Correct AnswerverifiedShow Answer

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known

Correct AnswerverifiedShow Answer

The line normal to the plumb line is known as

Correct AnswerverifiedB

The imaginary line passing through the intersection of cross hairs and the optical center of the objective, is known as

Correct AnswerverifiedShow Answer

Check lines (or proof lines) in Chain Surveying, are essentially required

Correct AnswerverifiedShow Answer

The constant vertical distance between two adjacent contours, is called

Correct AnswerverifiedShow Answer

There are two stations A and B. Which of the following statements is correct :

Correct AnswerverifiedShow Answer

Surveys which are carried out to depict mountains, rivers, water bodies, wooded areas and other cultural details, are known as

Correct AnswerverifiedShow Answer

The method of finding out the difference in elevation between two points for eliminating the effect of curvature and refraction, is

Correct AnswerverifiedA

The magnetic meridian at any point, is the direction indicated by a freely suspended

Correct AnswerverifiedShow Answer

The zero of the graduated circle of a prismatic compass is located at

Correct AnswerverifiedShow Answer

Scale can be represent by

Correct AnswerverifiedShow Answer

The line of collimation method of reduction of levels, does not provide a check on

Correct AnswerverifiedShow Answer

The horizontal angle between true meridian and magnetic meridian, is known

Correct AnswerverifiedB

Contours of different elevations may cross each other only in the case of

Correct AnswerverifiedShow Answer

A well-conditioned triangle has no angle less than

Correct AnswerverifiedShow Answer

If area is less than 250°km 2which method is used?

Correct AnswerverifiedShow Answer

Reduced bearing of a line is an angle between

Correct AnswerverifiedShow Answer

The boundary of water of a still lake, represents

Correct AnswerverifiedShow Answer

True bearing of a line = magnetic bearing + magnetic declination If declination is towards………

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
B

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
B

Correct Answer
verified

Correct Answer
verified

If area is less than 250°km ²which method is used?

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified